Energy Gel Packaging Choices Start With the Single Sachet

Energy Gel Packaging Choices Start With the Single Sachet

What to specify
  • Define 1 primary pack first. Agree on net fill, tear location, seal checks, and lot coding before pricing cartons.
  • A 6-pack at 40 g per sachet contains 240 g net. Add the weight of film and carton separately for shipping.
  • A 3-flavor 6-pack with 2 sachets per flavor needs a documented count and lot reconciliation for each flavor.

Test the real gel where the jaws meet the film

Gel viscosity changes with formulation and temperature. A set of empty film samples can confirm dimensions, but the filled sachet shows whether the gel strings into the seal area, leaks under pressure, or tears into an unusable opening.

A leak in the primary sachet can make the full carton unsaleable.

Quote each carton against a written pack count

The counts below illustrate one 40 g program. Change the count and pouch size to suit your channel and verify the assembled carton.

FormatSample countCount to verify
Single sachet1 × 40 gOne stable seal
Single-flavor carton6 × 40 g6 matching sachets
Variety carton3 flavors × 22 of each flavor

Make the pilot prove the seal and the assortment

On the QA bench

Use the real formula at the intended fill conditions. Sample during startup, steady running, and after adjustments. Inspect the seal transition, test for leaks with the agreed method, and check whether the notch opens consistently after the planned transport and storage screen.

For a variety box, match each sachet code to the outer carton lot. Run a count check and a simulated trace from a finished carton back to each flavor batch before approving routine packing.

A Lifeworth line operator collects stick packs beside vertical form-fill-seal equipment

Lifeworth stick-pack line. Inspect sample seals at startup and after line adjustments before releasing sachets for multipack assembly.

Send quantities at every level of the pack

Primary pack

Send target fill, film construction, tear position and printable code area.

Carton and case

Specify sachets per carton, cartons per case and the channel’s outer dimensions.

Variety pack

Attach the flavor map and who approves substitutions or rework.

Release checks

Agree on leak, tear, fill, lot-code and carton count acceptance.

Brief Lifeworth on your project

Send the gel sample or formula target, pouch drawing and proposed assortment for a feasibility review. For eligible projects with approved specifications and available materials, Lifeworth can target 3 days for samples, 25 days for a first order, and 15 days for a repeat order. Confirm dates against the agreed scope.

Frequently asked questions

Should the first order use single sachets and cartons?

Approve a common sachet first. A single-flavor carton can use the same primary pack if the artwork, code visibility, and channel requirements align.

Can I use the same film for every flavor?

Confirm compatibility and seal behavior on each relevant formula. A change in fill behavior can change the acceptance window.

What changes for a variety pack?

Plan a count-by-flavor check, component traceability, and rules for substitutions or partial lots.

What can the buyer compare before supplier data arrives?

Compare pack counts, geometry, labeling area, and channel fit. Use the real pilot to close questions about sealing and handling.

loading
+86 186 7636 9518 jerryz@szlifeworth.com +86 186 7636 9518